該納米涂層,，透明,，防水，防污垢,，防紫外線,，可用于多孔基材表面（天然石材人工石材均可）如砂巖,，混凝土，陶土,，粘土磚或石鑲板,。地板或墻面涂料，建筑立面,，陶器或屋頂瓦片都是該產品的應用范圍,。這種超薄納米涂層雖然會滲入孔內部，但卻不會影響基質透氣性,，是非常完美的建筑礦物質保護材料,。大部分污垢會被雨水沖走,。（中國進出口網）

使用范例：
各種含礦物質的材料的多孔表面
水泥/混凝土塊
石灰石/砂巖
多孔花崗巖/大理石
屋頂瓦片/泥土/兵馬俑

產品特點：
強疏水性疏油性
強不粘性
輕松去除沉積的空氣污染物
安全（化學性質不活潑）

優點：
對基質外觀沒有影響（涂層厚度：100-150納米）
優良的疏水疏油特性
無溶劑，無氣味
室內溫度下即可結晶硬化,。不需要額外的能量或紫外光線,。
高功效，低消耗
耐高溫
非?？箖?br />
其它優點：
污染物不會通過水滲入孔隙,。
方便清洗
持久浸透，非常好的抗凍融性,，不會冰裂,。
極大減少青苔和霉菌的生長
使基質壽命更長，因?yàn)榻档土饲逑粗芷凇?
給予基質表面持久的保護,。
使基質免受天氣損害

用法：
該產品操作簡單,，同樣適用于終端消費者使用：
1.工業：使用標準的HVLP系統。
2.手動：潤濕物體表面（通過噴灑或浸泡）

在距離物體表面10cm處噴灑,。
此二氧化硅涂層噴灑后24小時固化,。易清潔效果只能在硬化后進行測試。
施加該涂層前,，一定要徹底清潔物體表面,！

貯存：
未開封原裝容器納米涂層可以儲存至少2年。
建議倉儲和運輸溫度：3℃?30℃

噴涂面積：
手動及工業： 30 - 200 ml/㎡,，根據基質的吸收性而定,。

包裝：
250毫升和500毫升，罐裝,，用于商業用途,；5升和更大的罐裝納米涂層，則為工業使用,。


nanoblo® Mineral & Porus can therefore be used as an invisible, water- and contamination-resistant, UV-stable coating of porous substrate surfaces, regardless of whether the surface is a natural stone such as sandstone, concrete, terracotta, clay brick or stone panelling. Floor or wall coatings, building facades, functional terracotta or roof tiles are all in the scope of application for this product. Since nano-coatings only apply an ultra-thin coating on the inside of the pores, the substrates remain breathable after the coating - the perfect structural protection. The majority of the contamination is washed away by the rain.

Examples of use:
Every type of porous surface with a mineral-based origin
Concrete / Concrete blocks
Lime stone / Sandstone
Porous granite / marble
Roof tiles / clay / Terracotta

Product characteristics:
Strong hydrophobic + oleophobic properties
Strong non-stick properties
Excellent easy-clean effect regarding deposits of air pollution
Food safe (inert)

Advantages:
No influence on the appearance of the substrate (Layer thickness: 100-150 nm)
Excellent Hydro and Oleophobic properties
Solvent-free and odourless
Hardening at room temperature. No additional energy or UV light required.
Excellent efficiency with low quantity consumption
High temperature-resistance
Absolute frost-resistance

Other positive effects, such as e.g.:
No contamination can infiltrate the pore-structure through water.
Easy cleaning
Enduring impregnation enables very high freeze-thaw resistance and no cracking because of ice.
very heavy reduction of moss and fungus growth
Longer life-spans for substrates because of lowered cleaning cycles.
Enduring protection for the surface structure.
Weather damage prevention

Application:
Simple do-it-yourself application makes it suitable for end-customers as well:
1. Industrial: Application using standard HVLP systems
2. Manual: Application by wetting the surface (spraying or dipping)

Spray the surface form a 10 cm distance.
This SiO2-coating is completely networked and hardened after 24 hours. The easy-clean effect can only be tested after this hardening phase.
Stains that may have been left on the surface before the coating procedure will be trapped on the surface by the coating.
ALWAYS COAT CLEAN SURFACES!!!

Storage stability:
Unopened original containers can be stored for at least 2 years.
Recommended storage- and transport temperature: +3 to 30 oC

Consumption:
Manual & Industrial: between 30 and 200 ml/m2, depending on absorbency of the substrate.

Packaging:
The product comes in canisters of 250 ml and 500 ml for commercial use and in 5 liter and bigger canisters for industrial use.