設計該涂層的主要目的是,，使和玻璃一樣光滑的物體表面盡量少的接觸到灰塵顆粒,。（中國進出口網）

該產品疏水疏油,，可使污染物顆粒，如油脂,，油,，石灰和環境污染物較少的附著基質，還可以使人們不施加摩擦劑就可以很容易地從涂層表面除去這些污垢（“易清潔”效應）,。

使用范例：
衛生間的玻璃物體表面（花灑,，鏡子）
釉面陶瓷表面（廁所，水槽,，釉面磚）
窗戶玻璃+建筑玻璃（玻璃暖房,，高層建筑）
汽車玻璃（前窗側窗）
太陽能電池板

產品特點：
強疏水性
強抗粘性
輕松去除玻璃陶瓷上的污垢，石灰

其它性能：
透明液體（涂層厚度：100?150 毫微米）
永久（防紫外線,，非常耐磨損）
不會有溫度變化
操作簡單（可自己動手）
耐化學物質（pH值13或14的化學物質除外）

用法：
該產品操作簡單,，同樣適用于終端消費者使用：
1.手動：干凈的紙，亞麻或微纖維布,，圓周運動
2.工業：涂層拋光,，或涂層噴灑，HVLP噴涂

在距離物體表面10cm處噴灑,。
此二氧化硅涂層噴灑后24小時固化,。易清潔效果只能在硬化后進行測試。
施加該涂層前,，一定要徹底清潔物體表面,！

貯存：
未開封原裝容器納米涂層可以儲存至少2年。
建議儲物架和運輸溫度：3℃?30℃

噴涂面積：
手動：5 - 10 ml/㎡
工業：10- 15 ml/㎡

和其他產品相比,，nanoblo®二氧化硅涂層的競爭優勢：
•持久性及其壽命：紫外線穩定性確保其功效達數年之久,，接近于涂覆表面壽命
而其他涂層會在陽光下慢慢損耗
•耐磨及易清潔效應：基質施加納米涂層后，耐磨性能良好,。而許多和我們競爭的產品,，施加后，會很容易的磨損掉,。
•化學性能穩定：該產品耐清洗劑（幾乎所有的家庭用及工業用洗滌劑,，濃縮堿液除外）。
而許多和我們競爭的產品并不具備該特點,，在清潔后必須重新施加

包裝：
250毫升和500毫升,，罐裝，用于商業用途,；5升和更大的罐裝納米涂層,，則為工業使用。


This coating was designed to enable smooth, glass-like surfaces to have less contact with dirt particles.

The hydro- and oleophobic effects cause particles of contamination such as grease, oil, lime and materials from environmental pollution to adhere less to the substrates, and allow them to be easily removed from the coating, i.e. without applying abrasive agents ("Easy-clean" effect).

Examples of use:
Glass surfaces in sanitary areas (showers, mirrors)
Glazed ceramic surfaces (toilets, sinks, glazed tiles)
Window glass + construction glass (conservatories, high-rise buildings)
Automotive glass (front + side windows)
Solar panels

Product characteristics:
Strong hydrophobicity
Strong anti-stick properties
Excellent easy-clean performance on contamination and lime-scale

Other properties:
Invisible to the human eye (coating thickness: 100-150 nm)
Permanent (UV-stable, enormous abrasion-resistance)
Resistant to temperature change
Simple application (do-it-yourself)
Chemical-resistant (except for pH value of 13 or 14)

Application:
Simple do-it-yourself application makes it suitable for end-customers as well:
1. Manual: Application with circular motion using a clean paper, linen or microfibre cloth.
2. Industrial: Available as polish-coat systems or spray-coating systems, HVLP sprayers.

Spray the surface form a 10cm distance.
This SiO2-coating is completely networked and hardened after 24 hours. The easy-clean effect can only be tested after this hardening phase.
Stains that may have been left on the surface before the coating procedure will be trapped on the surface by the coating.
ALWAYS COAT CLEAN SURFACES!!!

Storage stability:
Unopened original containers can be stored for at least 2 years.
Recommended storage- and transport temperature: +3 to 30 oC

Consumption:
Manual: 5-10 ml/m2
Industrial: 10-15 ml/m2

Advantages of nanoblo® SiO2 coatings in comparison with competitive products:
• Permanence and longevity: UV-stability enables functionality for a number of years, approximately the lifetime of the coated surface
Many competitive products are damaged slowly by sunlight
• Abrasion-resistant easy-to-clean effect:
A permanent chemical bond with the substrate enables excellent abrasion resistance. Many competitive products can be easily removed by abrasion.
• Chemical stability: The product is resistant to almost all standard household and industrial cleaners (with the exception of concentrated lye).
Many competitive products must be reapplied after cleaning the surface.

Packaging:
The product comes in canisters of 250 ml and 500 ml for commercial use and in 5 liter and bigger canisters for industrial use.